FAG NU217-E-M1 Cylindrical Roller Bearings

C:19.5 kN; T max.:100 °C; B:36.4 mm; H2:41 mm; L:274 mm; A5:18.2 mm; d:31.75 mm; S:18.2 mm; Recommended tightening torque for set screw:8 Nm; Weight:1.98 kg;

d:160; Bearing Style:Open Type; Bearing Style:Open Type; Specifications/Environment:Standard; Specifications/Environment:Standard; Load Direction:Thrust; Outer Ring Shape:Flat; Outer Ring Shape:Flat; Rolling Element Material:Steel; Rolling Element Material:Steel;

Bearing Used:Deep Groove Ball Bea; Bearing Part Number:6002; Number of Bearings:Double; Bearing Retained:No; Type:Bearings with Housin; Type:Bearings with Housin; Bearing Retained:No; Number of Bearings:Double; Thickness, Height Indication:T, h Configurable; Seals:ZZ (Double Shield);

Outer Ring Type:Flat; Internal Clearance Symbol:No; Number of Raceway Ring Rows:Double Row; Shaft Bore Config.:Tapered hole; Type of momi removing:High tensile brass; Basic Load Rating, Dynamic Rating(N):1560000; Size Standards:Metric System; Inner/Outer Ring Material:Steel; D:520; Revolution Freque

Holder Surface Treatment:Black Oxide Coating; Bearing Material:[Steel] Steel; Housing Material:1045 Carbon Steel; Shape:Flange Type; Type:Bearings with Housin; Flange Shape:Square Type; Volume Discount:Available; Days to Ship:8 Days; Bearing Used:Deep Groove Ball Bea; RoHS:6;

G:M6x1; C:43.55 kN; N:M16; A1:33 mm; L:140 mm; Weight:3.12 kg; Designation of housing:PA211N-; H:63.5 mm; A:66 mm; Z:26.8 mm;

Type:Ball; Outer Ring Shape:Flat; Number of Raceway Ring Rows:Single Row; Type:Ball; Types:16**/6*** series; Size Standards:Metric System; Load Direction:Radial; Precision:Grade 0; Specifications/Environment:Standard / Dust Proo; Bearing Style:Rubber Sealed;

Load Direction:Radial; Specifications:Standard; Rotational Speed(rpm):3600; Internal Symbol:No; Special Configurations Code:No; Acoustic Symbol:No; Low Torque Specification:No; Inner/Outer Ring Material:Steel; Material Symbol:No; Retainer Type:Punching;

T min.:-40 °C; Dz:70 mm; Weight:1.16 kg; N:12mm; Designation of bearing:UC206-19G2T04; J:83 mm; S:15.9 mm; Z:44.2 mm; e:18 mm; A1:13 mm;

Da - Cup Frontface Backing Diameter:3.66 in; Cg - Geometry Factor:0.0979; Db - Cup Backface Backing Diameter:3.46 in; C - Cup Width:0.7656 in; e - ISO Factor2:0.4; D:3.8437 in; Series:28600; Cup Part Number:28622P; r - Cup Backface To Clear Radius1:0.030 in; Design Units:Imperial;

Number of Bearings:Double; Housing Material:304 Stainless Steel; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Height H(mm):30 ～ 60; Bearing I.D. d(mm):20; Shape:T-Shaped; Shape:T-Shaped; Seals:DD (Contact Rubber S; Thickness, Height Indication:T, h Configurable;

Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2250 lbf; Cone Part Number:19149X; d:38.001 mm; Ab - Cage-Cone Frontface Clearance:2.3 mm; R - Cone Backface To Clear Radius1:2.030 mm; Y - ISO Factor9:1.35; G2 - Heat Generation Factor (Rib-Roller End):11.5; G1 - Heat Generation Factor (Roller-

Min operating temperature, Tmin:-25 °C; f0:15.8; D:47 mm; B:9 mm; Characteristic outer ring frequency, BPF0:6.13 Hz; ra max:0.3 mm; da max:34 mm; Mass:0.05 kg; da min:32 mm; Brand:NTN;

Flange Shape:Square Type; Bearing Retained:Yes (with retaining; Bearing Material:[Steel] Steel; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Bearing Part Number:6800; Number of Bearings:Single; Seals:DD (Contact Rubber S; Number of Bearings:Single; Holder Surface Treatment:Electrole

Shape:Flange Type; Number of Bearings:Double; Type:Bearings with Housin; Bearing Retained:Yes (with retaining; Flange Shape:Square Type; Holder Surface Treatment:Not Provided; Seals:ZZ (Double Shield); Bearing Part Number:626; Flange O.D. H(φ):41; Number of Bearings:Double;